Home >> Camcorder Battery >>CANON >> BP-608A Camcorder Battery>> This battery has been designed to work with your original charger

Equivalent CANON BP-608A Camcorder Battery

Here you will find some of the lowest prices on most CANON BP-608A Camcorder Battery and related accessories.The BP-608A battery pack replaces the CANON Camcorder Battery, Meets OEM spCifications and is 100% compatible with the original equipment manufacturers spCifications at a lower price.


CANON BP-608A Battery
Meet or Exceed Original Specifications !
  • Battery Weight : 90g
  • Battery Chemistry : Li-ion
  • Voltage : 7.2V
  • Battery Capacity : 950mAh
  • Battery Color : Black
  • Product Number : VCN006
  • Dimensions : 70.50x30.10x16.00 mm
  • High capacity, Longer Record Time
USD $12.93+ (S&H)
Bookmark

CANON BP-608A Camcorder Battery
In Stock And Ready To Ship

CANON BP-608, CANON BP-608A,

CANON DM-CV11 Battery, CANON DM-MV100 Battery, CANON DM-MV20i Battery, CANON DM-PV1 Battery, CANON DV-MV100 Battery, CANON DV-MV20 Battery,

1) A new BP-608A battery usually maintains a discharged condition with very low capacity. It is highly rCommended to fully charge new CANON BP-608A batteries packs before using.

2) A new CANON battery pack needs to be circled (fully discharged and rCharged) three to five times to reach its optimum performance.

3) Recharge a spent battery as soon as possible after use. While this isn't critical, shallower charges of Li-Ion batteries put less stress on the battery than a deep full charge. Besides, you never know when you might meet Elvis.

Do not leave the battery in the charger after the indicator says it's fully replenished. (Don't    leave the battery in the camcorder either.) Store the battery at room temperature. Stashing it in the fridge to slow battery drain is pointless if you...

   Top up the battery again, just before your next shooting session, to compensate for power slowly lost while the battery was on the shelf.

Unless you're using old NiCds (see sidebar) it's not necessary to "condition" a battery by discharging it down to one volt before recharging it. A periodic full discharge is not required for lithium-based batteries and, in fact, a partial re-charge produces less wear than a full charge.


CANON BP-608A Battery
Meet or Exceed Original Specifications !
  • Battery Weight : 61g
  • Battery Chemistry : Li-ion
  • Voltage : 7.2V
  • Battery Capacity : 950mAh
  • Battery Color : Silver Champagne
  • Product Number : VCN006C
  • Dimensions : 70.50x30.10x16.00 mm
  • High capacity, Longer Record Time
USD $13.85+ (S&H)
Bookmark

CANON BP-608A Camcorder Battery
In Stock And Ready To Ship

CANON BP-608, CANON BP-608A,

CANON DM-CV11 Battery, CANON DM-MV100 Battery, CANON DM-MV20i Battery, CANON DM-PV1 Battery, CANON DV-MV100 Battery, CANON DV-MV20 Battery,

1) A new BP-608A battery usually maintains a discharged condition with very low capacity. It is highly rCommended to fully charge new CANON BP-608A batteries packs before using.

2) A new CANON battery pack needs to be circled (fully discharged and rCharged) three to five times to reach its optimum performance.

3) Recharge a spent battery as soon as possible after use. While this isn't critical, shallower charges of Li-Ion batteries put less stress on the battery than a deep full charge. Besides, you never know when you might meet Elvis.

Do not leave the battery in the charger after the indicator says it's fully replenished. (Don't    leave the battery in the camcorder either.) Store the battery at room temperature. Stashing it in the fridge to slow battery drain is pointless if you...

   Top up the battery again, just before your next shooting session, to compensate for power slowly lost while the battery was on the shelf.

Unless you're using old NiCds (see sidebar) it's not necessary to "condition" a battery by discharging it down to one volt before recharging it. A periodic full discharge is not required for lithium-based batteries and, in fact, a partial re-charge produces less wear than a full charge.


CANON BP-608A Battery
Meet or Exceed Original Specifications !
  • Battery Weight : 135g
  • Battery Chemistry : Li-ion
  • Voltage : 7.2V
  • Battery Capacity : 1850mAh
  • Battery Color : Black
  • Product Number : VCN007
  • Dimensions : 70.60x30.00x36.60 mm
  • High capacity, Longer Record Time
USD $15.78+ (S&H)
Bookmark

CANON BP-608A Camcorder Battery
In Stock And Ready To Ship

CANON BP-608, CANON BP-608A, CANON BP-617,

CANON DM-MV20i Battery, CANON DM-PV1 Battery, CANON DV-MV20 Battery,

1) A new BP-608A battery usually maintains a discharged condition with very low capacity. It is highly rCommended to fully charge new CANON BP-608A batteries packs before using.

2) A new CANON battery pack needs to be circled (fully discharged and rCharged) three to five times to reach its optimum performance.


CANON BP-608A Battery
Meet or Exceed Original Specifications !
  • Battery Weight : 175.77g
  • Battery Chemistry : Li-ion
  • Voltage : 7.2V
  • Battery Capacity : 1850mAh
  • Battery Color : Silver Champagne
  • Product Number : VCN007C
  • Dimensions : 70.60x30.00x36.60 mm
  • High capacity, Longer Record Time
USD $14.95+ (S&H)
Bookmark

CANON BP-608A Camcorder Battery
In Stock And Ready To Ship

CANON BP-608, CANON BP-608A, CANON BP-617,

CANON DM-MV20i Battery, CANON DM-PV1 Battery, CANON DV-MV20 Battery,

1) A new BP-608A battery usually maintains a discharged condition with very low capacity. It is highly rCommended to fully charge new CANON BP-608A batteries packs before using.

2) A new CANON battery pack needs to be circled (fully discharged and rCharged) three to five times to reach its optimum performance.

3) Recharge a spent battery as soon as possible after use. While this isn't critical, shallower charges of Li-Ion batteries put less stress on the battery than a deep full charge. Besides, you never know when you might meet Elvis.

Do not leave the battery in the charger after the indicator says it's fully replenished. (Don't    leave the battery in the camcorder either.) Store the battery at room temperature. Stashing it in the fridge to slow battery drain is pointless if you...

   Top up the battery again, just before your next shooting session, to compensate for power slowly lost while the battery was on the shelf.

Unless you're using old NiCds (see sidebar) it's not necessary to "condition" a battery by discharging it down to one volt before recharging it. A periodic full discharge is not required for lithium-based batteries and, in fact, a partial re-charge produces less wear than a full charge.